亚洲欧美日韩天堂-亚洲欧美日韩视频一区-亚洲欧美日韩三级-亚洲欧美日韩伦中文-亚洲欧美日韩另类在线专区-亚洲欧美日韩另类在线一

產品搜索 Search
產品目錄 Product catalog

產品名稱:

電流探頭| CT2

更新時間:2024-09-07

產品型號:CT2

產品報價:

產品特點:電流探頭| CT2 The CT1 and CT2 Current Probes are designed for permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current

CT2電流探頭| CT2的詳細資料:

電流探頭| CT2

電流探頭| CT2

 

Features & Benefits

  • High Bandwidth
  • Ultra-low Inductance
  • Very Small Form Factor
  • Characterize Current Waveforms up to <200 ps Rise Times
  • Very Low Loading of Circuit Under Test
  • Fits Into Dense, Closely-spaced Circuit Designs

Applications

  • Data Storage Read Channel Design
  • Silicon Characterization
  • High-frequency Analog Design
  • ESD Testing
  • Signal Injection
  • Differential Current Measurements
  • Single-shot Low Rep-rate Pulse Measurements
  • Propagation Delay Measurement

CT6 Current Probe

The CT6 is the newest addition to the Tektronix portfolio of high-frequency current probes. It is designed to meet the needs of high-speed circuit design and test applications which require ultra-high bandwidth, low inductance, and extremely small form factor. The CT6 provides up to 2 GHz bandwidth when used with high-bandwidth oscilloscopes such as the Tektronix TDS694C, TDS794D, and TDS7000 Series oscilloscopes or with other compatible 50 Ω input measuring instruments. Low inductance (<3 nH) assures that the loading effect of the CT6 on the circuit-under-test will be negligible, which is especially important for today's low-amplitude, high-speed circuit designs such as disk drive read/write preamplifiers. The probe is a closed-circuit design which will accept uninsulated wire sized up to 20 gauge. This product is exempt from CE mark by virtue of its 30 V voltage limit.

CT1/CT2 Current Probes

The CT1 and CT2 Current Probes are designed for permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly.

The P6041 Probe Cable provides the connection between the CT1 and CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connected to a high-impedance (1 MΩ) oscilloscope input. One probe cable can be used to monitor several current transformers that have been wired into a circuit.


CT1/CT2. Current Probes with P6041 BNC Probe Cable.

 

Miniature Construction

The CT1 and CT2 detachable cable design enables one or more probes to be located on circuit boards or in other limited space areas.

The CT6 offers the smallest form factor available, for measurement on ever-shrinking circuit boards and components. It is designed for temporary installation and does not incorporate removable cables, as the CT1 and CT2 do.

Extendible Probe Length

Specified rise time and bandwidth are obtained when using the probe cables provided: The P6041 cable used with the CT1 and CT2 is 42 inches nominal. If additional length is required, the cables can be extended by using high-quality 50 Ω cable and suitable interface connectors. (Also see Special Probe Cables, Optional Accessories.) Long cables may degrade high-frequency response.

High Sensitivity

The CT1 and CT6 provide an output of 5 mV for each milliamp of input current when terminated in 50 Ω. The CT2 provides 1 mV per milliamp when terminated in 50 Ω.

Typical Systems

The CT1, CT2, and CT6 high-frequency current transformers are dynamic (i.e., non-DC) current measuring devices. They are typically used in conjunction with compatible high-bandwidth oscilloscopes and other instruments to observe and/or record high-frequency current waveforms. The CT1, CT2, and CT6 normally operate directly into 50 Ω scopes and other measuring device inputs.

The CT1 or CT2 can be used with 1 MΩ input systems; use the P6041 probe cable and terminate the output with a 50 Ω feed-through termination (see Optional Accessories).

In all cases, the CT1, CT2, and CT6 must work into 50 Ωs to obtain specified performance and sensitivity.

 

 如果你對CT2電流探頭| CT2感興趣,想了解更詳細的產品信息,填寫下表直接與廠家聯系:

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7

上一篇:CT1電流探頭| CT1

下一篇:CT6電流探頭| CT6

滬公網安備 31011402002799號

主站蜘蛛池模板: 波多野结衣 在线| 91制片厂果冻星空传媒3xg| 午夜性爽视频男人的天堂在线| 好大夫在线个人空间| 无限好资源免费观看| 轻轻操在线视频| 4hc44四虎www在线影院男同| 三级黄色图片| 日本韩国无矿砖码| 动漫美女3d被爆漫画| 大奶老太| 15同性同志18| 日本videossexx日本人| 日韩欧美天堂| 花核调教| 成人免费淫片95视频观看网站| 男人都懂www深夜免费网站 | 国产欧美日韩图片一区二区| 99ri国产精品| 91插视频| 亚洲国产免费观看视频| 亚洲国产日韩成人综合天堂| s8sp加密路线和免费路线首页| 26uuu成人人网图片| 性妲己| 趴好撅高打屁股sp调教h| 四虎在线视频免费观看| 4399h漫画| asianfemdom妍妍女王| 国产一区二| 69欧美另类xxxxx高清| 亚洲成人影院在线观看| 免费在线看| 日韩精品成人| 国产 日韩欧美| 国产主播福利在线观看| 国产亚洲精品综合在线网址| 好大好猛好深好爽视频| 999久久精品国产| 丝袜美女被艹| 亚洲精品国产成人中文|